You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
  • Your shopping cart is empty!

Mag Drills & Punching

Mag Drills & Punching

RIX portable magnetic drill units , high quality machinery for metal fabrication drilling by means of annular core cutters.

Annular core cutters enable the drilling of large diameter holes in steel by removing the outer ring of the required

hole and ejecting the waste slug. This method drills up to eight times faster than conventional twist drills.

Annular core cutters are made from HSS steel or for harder materials TCT ( carbide Tipped ).





ALFRA Core drilling machines can be viewed separately by visiting www.alfra.de


RIX & ALFRA Magnetic drills units and accessories are available to purchase throughout the UK via a network

of official dealers and stockists. Please call  or message for your nearest retailer.







Twist Drill Weldon

Weldon Shank Twist Drills .Direct fit HSS-G twist drills for weldon shank machines.For drilling small diameters holes in steels. Direct fit negatesthe use of using a chuck & adaptor set.Size options:6.0mm, 7.0mm,8.0mm,9.0mm, 10.0mm,11.0mm & 12.0mm...

£0.00

Weldon Chuck Adaptor

Weldon chuck adaptor.Screws directly into 1/2X20F chucks...

£0.00

HSS Countersink Cutter 90°

HSS Countersinks 3 Flute 90° angle.Weldon Shank for direct fit.Four diameter size options:25.0 mm Ø 30.0mm Ø   40.0 mm Ø  & 55.0mm Ø M/C Usage:RIX35  Up to 30.0 mm Ø CountersinksRIX40HL Up to 40.0 mm Ø CountersinksRIX50 Up to 40.0 mm Ø CountersinksRIX85 All Countersink d..

£0.00

Magnetic Chip Remover

RIX Pro user Magnetic Chip RemoverWith a high quality stainless steel rod clean up is quick and easywhen removing damaging swarf and chippings. Chipping areattracted to an extra powerful magnetic rod and released by meansof a draw bar. This tool is essential to clear swarf when drilling.Trapped swar..

£0.00

Magnetic Sweeper

Magnetic Chip Removal Sweeper.Telescopic handle. Adjustable 75cm-105cmSweeper width 40CMLoad capacity up to 9KGEasy release mechanism...

£0.00

TCT Countersink Cutter 90° 50.0mm Ø

Carbide faced 3 Flute countersink cutter  90° angle.Weldon Shank for direct fit.Form type as HSS countersinks but with 3 Tungsten carbide segments brazed onto the cutting face.Recommended for harder difficult to cut Steels & alloys.Only available in 50.0mm diameter...

£0.00

BIO200 Bio-degradeable cutting spray

RIX 2000 Bio cutting oil spray is an advanced formula designed to be used where contaminationto the enviroment needs to be managed. Example waterways. Its unique properties gives superior performance by extending cutter lifeand reducing harmful cutter stresses.Can Size 400ml ..

£0.00

Ambro-sol cutting oil

Ambro-sol  spray is a heavy duty protective tool lubricant. a new productspecially developed for hard metal cutting applications. With a paraffin andmineral oil base plus anti weld EP performance additives make this productsuitable for the toughest of metal cutting and threading tasks.Can size ..

£0.00

Fein Quick-in adaptor

Adaptor for Weldon shank cutters Adapts from FEIN Quick-in to standard grub screw retention...

£0.00

Pipe Clamp Attachment

Universal Pipe clamp attachment for magnetic stands. A useful attachment that attaches to round steel pipesby means of a webbing strap. Offers a stable platformwhen drilling curved surfaces.Suits pipe diameters 80 - 900.0mm.Plate dimensions 100 X 235 mm..

£0.00

Tapping attachment M3-M12

Universal tapping attachment suitable for 2MT magnetic drillsAdjustable jaws ( no need for collets ). Push / Pull operation.R/Hand rotation on pressure, auto reverses when pressure is off.Complete with 2MT Arbour & Weldon shank Arbour.Suits Taps M3-M12..

£0.00

Tapping attachment M10-M20

Universal tapping attachment suitable for 2MT magnetic drillsAdjustable jaws ( no need for collets ). Push / Pull operation.R/Hand rotation on pressure, auto reverses when pressure is off.Complete with 2MT Arbour & Weldon shank Arbour.suits M10 - M20 Tap sizes..

£0.00

Weldon Tool Holder MT2 Without cooling

Universal Weldon toolholder suitable for 2MT magnetic drills & pillar drills.For holding Weldon shank annular core core cutters. Internal spring loaded ejector for waste slug release.Without through coolant.apply coolant by spray or paste...

£0.00

Weldon Tool Holder MT3 Without cooling

Universal Weldon toolholder suitable for 3MT magnetic drills & pillar drills.For holding Weldon shank annular core core cutters. Internal spring loaded ejector for waste slug release.Without through coolant.apply coolant by spray or paste...

£0.00

Weldon Tool Holder MT2 With Internal cooling

Through Coolant Universal Weldon toolholder suitable for 2MT magnetic drills & pillar drills.For holding Weldon shank annular core core cutters. Internal spring loaded ejector for waste slug release.With coolant flow, gravity fed via coolant tank...

£0.00

Showing 16 to 30 of 54 (4 Pages)